Diamond Grinding Wheel Grit Selection for Coborn PG Machines
Metal Bond Diamond Grinding Wheels for Coborn PG Series Machines
Metal bond diamond grinding wheels are used on Coborn PG series planetary grinding machines for precision grinding of natural and synthetic single crystal diamond (SCD) tools. These wheels are designed for applications requiring controlled material removal, accurate cutting-edge geometry, and consistent grinding performance.
For diamond tool manufacturers using Coborn PG3, PG3+, PG3B, or PG6 machines, selecting the appropriate grinding wheel and abrasive grit size is essential for maintaining machining stability and achieving the required tool geometry and surface quality.
Moresuperhard manufactures metal bond diamond grinding wheels for compatible Coborn PG series machines, with customized wheel dimensions and abrasive specifications available according to machine configuration and application requirements.
Metal Bond Diamond Grinding Wheels for Coborn PG Machines
Coborn PG series machines are planetary grinding machines developed for manufacturing precision single crystal diamond tools.
Single crystal diamond has extremely high hardness and requires diamond abrasives for grinding. Its crystallographic characteristics also influence grinding behavior, making grinding direction, abrasive size, and wheel preparation important factors in the machining process.
Metal bond diamond grinding wheels are suitable for precision grinding applications involving:
— Natural single crystal diamond tools
— HPHT synthetic single crystal diamond tools
— Suitable CVD synthetic single crystal diamond materials
Typical applications include radius tools, multi-facet tools, conical tools, and other precision diamond cutting tool geometries.
Compatible Coborn PG Series Grinding Machines
Moresuperhard provides metal bond diamond grinding wheels for compatible Coborn PG series equipment.
The relevant machine models include:
–Coborn PG3
–Coborn PG3+
–Coborn PG3B
–Coborn PG6
Each machine has its own spindle, mounting, and wheel configuration. Therefore, grinding wheel dimensions and mounting requirements should be confirmed before ordering.
For example, the Coborn PG6 technical information specifies an Ø85 mm metal bond grinding wheel or a cast iron scaife plate. This dimension should not automatically be applied to other PG series models.
Metal Bond Diamond Grinding Wheel Specifications
Moresuperhard supplies metal bond diamond grinding wheels for single crystal diamond tool grinding. Wheel specifications can be customized according to the machine model and machining requirements.
| Specification | Available Options / Reference |
|---|---|
| Product | Metal Bond Diamond Grinding Wheel |
| Bond Type | Metal Bond |
| Abrasive | Diamond |
| Grit Size | 400#–10000# reference range |
| Wheel Type | 1A2 and other configurations subject to confirmation |
| Machine Compatibility | Coborn PG3, PG3+, PG3B, PG6 |
| Wheel Diameter | Customized according to machine configuration |
| Application | Single Crystal Diamond Tool Grinding |
Diamond Grit Size Selection for Single Crystal Diamond Grinding
Choosing the correct diamond abrasive size is important for controlling material removal, grinding marks, and final surface quality when processing single crystal diamond.
For single crystal diamond grinding, two common abrasive approaches should be distinguished:
–Bonded diamond grinding wheels: Sintered metal bond diamond wheels are used on compatible grinding machines, including Coborn and EWAG equipment.
–Diamond micron powder with grinding discs: Diamond micron powder is used together with cast iron, tin, or copper grinding discs for different grinding and polishing stages.
These are different grinding configurations. W-series micron powder designations should not be directly converted into bonded grinding wheel mesh specifications without confirming the abrasive grading standard.
1. Bonded Diamond Grinding Wheel Grit Selection
For Coborn/EWAG grinding wheel applications, the following grit ranges can be used as product references:
| Grinding Stage | Reference Grit Size | Main Purpose |
|---|---|---|
| Coarse Grinding | 400#–800# | Initial material removal and rough shaping |
| Fine Grinding | 1000#–10000# | Refining tool geometry and improving cutting-edge finish |
The appropriate grit size depends on the initial tool condition, grinding allowance, required geometry, and final surface quality.
Coarser wheels are generally selected for initial material removal, while finer diamond wheels are used for subsequent precision grinding.
2. Diamond Micron Powder Selection for Grinding Discs
When using diamond micron powder with cast iron or soft metal grinding discs, abrasive selection generally follows a gradual reduction in particle size.
Skipping several abrasive grades can leave deeper grinding marks or subsurface damage that may be difficult to remove during subsequent finishing operations.
The following table provides a reference selection guide for single crystal diamond grinding and polishing.
| Grinding Stage | Diamond Micron Size | Approx. Mesh Reference | Grinding Disc Material | Main Purpose |
|---|---|---|---|---|
| Coarse Grinding | W20, W14, W10 | W20 ≈ 800#, W10 ≈ 1500# | Cast Iron | Removing excess material, laser-cutting or slicing damage, and shaping |
| Semi-Fine Grinding | W7, W5 | W5 ≈ 3000# | Cast Iron | Removing coarse grinding scratches and improving flatness |
| Fine Grinding | W3.5, W2.5, W1.5 | W2.5 ≈ 5000# | Cast Iron / Tin | Pre-polishing and reducing grinding damage |
| Ultra-Fine Polishing | W1, W0.5, W0.25 | W0.5 ≈ 10000# | Tin / Soft Metal | Achieving a mirror-like surface finish |
3. Recommended Grinding and Polishing Process Routes
For mass production of single crystal diamond tools or single crystal diamond wafers, the following abrasive sequences provide practical starting references.
Route A – Conventional Grinding Process
W20 → W10 → W5 → W2.5 → W1 → W0.5
This sequence is suitable as a general reference when more material needs to be removed and successive grinding stages are required.
Route B – Reduced Grinding Allowance
W10 → W5 → W2.5 → W0.5
This sequence can be considered when the remaining material allowance after slicing is relatively small.
The actual process should be adjusted according to the initial surface condition, grinding allowance, tool geometry, and required finish.
4. Diamond Abrasive Type Selection
Diamond abrasive type is another factor to consider when selecting grinding and polishing materials.
For single crystal diamond processing:
–Single crystal diamond micron powder: Can be used for coarse grinding and material removal.
–Polycrystalline diamond micron powder: Preferred in the polishing stages in the supplied process reference because of its self-sharpening characteristics and more uniform scratching behavior.
The final abrasive selection should be evaluated together with the grinding disc material, operating conditions, and required surface quality.
Grinding Wheel Preparation and Grinding Performance
Wheel preparation is an important consideration when using metal bond diamond grinding wheels on Coborn PG machines.
A new grinding wheel may require appropriate preparation before it can deliver the required grinding performance. According to the Coborn equipment information, preparation of a new wheel can take several days, depending on the wheel and preparation requirements.
The preparation condition of the grinding wheel, together with machine stability and selected grinding parameters, influences the consistency of the grinding process.
For manufacturers operating multiple PG series machines, preparing suitable replacement wheels in advance can help reduce production interruptions.
When using diamond micron powder and separate grinding discs, the condition of the disc surface and the abrasive particle size should also be controlled throughout the successive grinding and polishing stages.
Why Choose Moresuperhard Metal Bond Diamond Grinding Wheels?
Moresuperhard manufactures diamond and CBN grinding tools for precision grinding applications.
For Coborn PG series machines, we provide metal bond diamond grinding wheels designed around the actual machine configuration and single crystal diamond tool manufacturing requirements.
Our customization services include:
–Customized Wheel Dimensions: Wheel diameter, thickness, bore, and mounting configuration can be confirmed according to the machine.
–Diamond Grit Selection: Different abrasive specifications are available for coarse and fine grinding applications.
–Metal Bond Formulation: Wheel specifications can be adjusted according to the grinding application and required performance.
–Application-Based Recommendations: Wheel selection considers the workpiece material, tool geometry, grinding stage, and machine configuration.
Whether you need replacement diamond grinding wheels for Coborn PG3, PG3+, PG3B, or PG6 machines, Moresuperhard can help evaluate suitable specifications for your application.
—EDITOR: Doris Hu, Cindy Chen
–POST: Doris Hu





