Blog

Home > Blog > Vitrified bond CBN wheel for grinding camshaft of Motorcycle with low speed

Vitrified bond CBN wheel for grinding camshaft of Motorcycle with low speed

2021-03-19

Vitified CBN grinding wheel is mainly used in automobile, motorcycle, diesel, gasoline and other camshafts and crankshafts.Materials include cast iron, carbon steel, alloy steel, bearing steel, etc.It is suitable for Japanese Toyota, German Junker and Schott grinder.

1,  Grinder: PAlAMRY
2,  RPM:1700 MAX
5,  Coolant: Oil with water
3,Line Speed:31m/s.  Using line: 24m/s
4.  HRC:55-60
6,   Grinding allowance:1mm
7.   Dressing period: 120

Difficulty: (Junker/Toyota/Landis) and other mainstream grinding machines can make the grinding wheel reach 80m/s-150m/s. The ultra-high speed gives the grinding wheel more possibilities and also conceals the possible problems of the grinding wheel.
The low-speed and high-feed grinding wheel has higher requirements for the grinding wheel. Whether the grinding wheel is too soft or too hard, it will cause damage to the camshaft surface, or it will take a lot of time to repair, and the gain is not worth the loss.